§ 1512.12. Requirements for wheel hubs.
222 words·~1 min read·
/us/cfr/t16/s§ 1512.12·A research copy — for the controlling text, always check the official state or federal source. Not legal advice.
All bicycles (other than sidewalk bicycles) shall meet the following requirements:
(a)Locking devices. Wheels shall be secured to the bicycle frame with a positive lock device. Locking devices on threaded axles shall be tightened to the manufacturer's specifications.
(1)Rear wheels. There shall be no relative motion between the axle and the frame when a force of 1,780 N (400 lbf) is applied symmetrically to the axle for a period of 30 seconds in the direction of wheel removal.
(2)Front wheels. Locking devices, except quick-release devices, shall withstand application of a torque in the direction of removal of 17 N-m (12.5 ft-lb).
(b)Quick-release devices. Lever-operated, quick-release devices shall be adjustable to allow setting the lever position for tightness. Quick-release levers shall be clearly visible to the rider and shall indicate whether the levers are in a locked or unlocked position. Quick-release clamp action shall emboss the frame or fork when locked, except on fiber reinforced plastics.
(c)Front hubs. Front hubs not equipped with lever-operated quick-release devices shall have a positive retention feature that shall be tested in accordance with the front hub retention test, § 1512.18(j)(3), to assure that when the locking devices are released the wheel will not separate from the fork. \[43 FR 60034, Dec. 22, 1978, as amended at 76 FR 27888, May 13, 2011\]